Signal Converters

• Current inputs 0/4..20 mA
• Voltage inputs 0..5, 0..10 V, +/-10V
• Potentiometer
• Outputs 0/4..20 mA, 0..5/10V, +/-10V, or passive 2-wire 4-20 mA
• Power supply for 2 wire transmitter
• Galvanic isolation
• Four selectable dampings
• Nominal accuracy 0.05% of range
• Power supply 24 VDC +/-10%
• mV inputs on request

Data Sheets

• Input 4..20 mA
• Output alternatives 0..20 mA, 4..20 mA or 0-10V
• Galvanic isolation 3000V
• Auxiliary power supply not required
• Accuracy 0.05% of span

Data Sheets

• Very slim, only 9.5mm
• 2-wire output 4..20 mA
• Inputs 0..20 mA, 4..20 mA or 0-10V
• Galvanic isolation 1000V
• Power supply 10..34 VDC
• Voltage drop in input loop 1V
• Output load 700 ohm (with 24VDC)
• Accuracy 0.05% of span

Data Sheets

• 2 universal independently programmable inputs
• 2 programmable analogue outputs
• 2 alarm relays
• Mathematical & conditional operations
• Modbus RTU & RS485 serial communications
• Power supply 90-240 VAC or 24VDC

Data Sheets

• Strain guage sensors with 4 or 6 wire connection
• Excitation to sensors 10 V, max 150 mA
• Red LED display on front panel
• Configuration via front panel keys or programme software
• 0/4..20 mA or 0-10 V output
• RS 485 serial communications
• 2 alarm relays
• Taring via front panel keys or digital input
• Measuring accuracy < 0.05%
• Power supply 12..32 VDC or 85..240 VAC
• 6 points linearisation

Data Sheets

• Process input 0/4..20 mA, 0..5/10V or -20..+20 mA
• Potentiometer
• -100..+100 mV
• Thermocouples B,C, D, E, G, J, K, L, N, R, S, T
• RTD`s Pt100, Pt500, Pt1000, ja Ni100, Ni1000
• Outputs 4..20 mA
• Programming via programme software or hand held programmer
• Galvanic isolation between input, output & power supply
• Compact size
• Power supply 24 VDC

Data Sheets

• Process input 0/4..20 mA, 0..5/10V or -20..+20 mA
• Potentiometer
• -100..+100 mV
• Thermocouples B,C, D, E, G, J, K, L, N, R, S, T
• RTD`s Pt100, Pt500, Pt1000, ja Ni100, Ni1000
• Outputs 0..20, 4..20 mA, 0..5, 0..10V
• Programming via programme software or hand held programmer
• Galvanic isolation between input, output & power supply
• Compact size
• Power supply 24 VDC

Data Sheets

• Inputs 0..20 mA, 4..20 mA
• Output 0..20, 4..20 mA, 0..5, 0..10 V
• (A+B) (A-B) (A+B)/2
• Configuration via programme software or hand held programmer
• Power supply 24 VDC

Data Sheets

• Input 0-20 Khz
• Output 0(4)..20 mA or 0-10 V
• Pulse output for divider or alarm
• Power supply 24 VDC

Data Sheets

• Process input 0/4..20 mA, 0..5/10V or -20..+20 mA
• Potentiometer
• -100..+100 mV
• Thermocouples B, C, D, E, G, J, K, L, N, R, S, T
• RTD`s Pt100, Pt500, Pt1000, ja Ni100, Ni1000
• Output RS485 serial communications
• Configuration via programme software or hand held programmer
• Power supply 24 VDC

Data Sheets

• 16 individually configurable input channels
• Process input 0/4..20 mA, 0..5/10V
• Potentiometer & RTD
• 0- 100 mV
• Thermocouples B,C, D, E, G, J, K, L, N, R, S, T
• Analogue output 0/4..20 mA or 0..10 V, channel selection via digital inputs or Min/Max value
• 2 alarm relays
• Digital front panel display
• Modbus RTU & RS485 SCL protocols
• Power supply 24 VDC, galvanically isolated from inputs

Data Sheets

• Process input 0/4..20 mA, 0..5/10 or -10..+10V
• Relay Output
• Supply 230 VAC or 24 VDC

Data Sheets